Entorf, Robert F.

105 ft. x 24 ft. timber and concrete bridge over Flat Creek. Eighty feet (40 ft. left and 40 ft. right) of existing right-of-way. Proposed triple 10 ft. x 10 ft. x 55 ft. concrete bridge culvert on existing alignment. No additional right-of-way would be required for this project.

In compliance with Section 106 of the National Historic Preservation Act of 1966 and amendments thereto, project PR-422 (293), Upson County has been surveyed with respect to archaeological resources, especially those on or eligible for inclusion in the National Register of Historic Places (NRHP).

77’ x 20.2’ bridge with masonry and timber substructure, steel beams, and concrete deck; 60’ row estimated. 100; x 30’ bridge estimated. 100’ row estimated; project is located at Lovvorn Mill road (CR 140) over Indian Creek.

207 ft x 22 ft bridge structure with steel piling with concrete casing, steel beams, steel caps, concrete deck and steel handrail. 200 ft of existing right of way. A 217 ft x 38 ft concrete bridge is proposed to be built on existing alignment.

-Existing structure is a 19'x39' timber & steel bridge; Existing right of way is 60ft. total.

- Project begins 300'SE of the stream and ends 300 ' NW of the stream.

-New structure is a dbl.dbl. 8' x8' concrete bridge culvert

Beginning just east of prince avenue in Athens, extending along the north Athens Bypass, US 25 129/STB for 3 miles. Widen 6 existing double bridge on the North Athens Bypass, each bridge widen 10 feet left and right.

22.3 1 X30 1 bridge on wooden pi lings; Existing R/W is 50 ft. Rep lace bridge on existing alignment with a triple 71 X51culvert. Road to be closed during construction. Minor R/W required.

24'X77' Bridge over Cypress Creek, 24'X92' Bridge over Halden Branch. Approaches have 24' paving with shoulders approximately 5 foot wide. Existing R/V 100 feet. Replace bridge at Cypress Creek with a dbl. dbl. 10'X6' concrete culvert and at Halden Branch with a triple 9'X6' concrete culvert.

Ocumlgee River widen 4’ inside and 10’ outside new width 42’ x 816’ and 42’ x 840. Widen existing structures no additional R/W.

Replace bridge on existing alignment with bridge of approx. equal length widened to 40 f t. Reconstruct approaches and widen shoulders to 8 ft. Minor R/W required; easement required on downstream s ide of bridge for detour.